28 - 50 MHz RF Jammer Module

The 28 - 50 MHz RF jammer module features in the high average output power, good In-band-flatness and small offset between upper and lower side band, It is widely applied to the 28-50 MHz wireless information security product.

Send Inquiry

Product Description

28 - 50 MHz RF Jammer Module

Brief Introduction

* It is widely applied to the 28-50 MHz wireless information security product

* It features in the high average output power, good In-band-flatness and small offset between upper and lower side band

* The standard product has the VCO signal source inside ( No VCO version is available and customer needs to tell us the input signal strength such as 0-10dBm )

* The customized options including the software control interface, the exact output power, the output power adjustment option and the input/output connector type, etc.

Product Specifications

Item No.	Item Name	Data	Unit	Note
1	Frequency Range	28- 50	MHZ
2	Working Temperature	-10~+75	℃
3	Max Output Power	50	W
4	Working Voltage	DC24	V
5	Max Gain	47	dB
6	Flatness	±1	dB
7	Max Current	5	A
8	Input/Output VSWR	≤1.5
9	Input Connector	D-SUB
10	Output Connector	N/F		50Ω
11	Work Efficiency	41.6		When Max Output
12	Switch Control	High Low Level Current Output	V	0V OFF/0.6 ON
13	Size	202 * 102 * 27	mm	Including the Connector Length
14	Weight	910	g	Approximate Value
15	Out Shell Material	Aluminum

Product Size and Weight

Precautions

Please ensure the RF jammer module is equipped with the necessary heat dissipation accessory, the well-connected antenna and the suitable power supply before its use.

-- For heat dissipation accessory

* Cause the output power is on the high side, the module will have the rising temperature

* Please ensure the module is equipped with the suitable heat sink and cooling fans to keep the module at a low temperature and in a high efficient status

* If without the relative heat dissipation accessory, the module will have the short wire or be directly damaged

-- For antenna connection

Please ensure the antenna is well connected before the power is on or the jammer module will be damaged

-- For power supply

When the voltage option is 24 to 28V, the jammer module will have the optimization jamming effect