Brief Introduction
* It is widely applied to the 90-110 MHz wireless information security product
* It features in the high average output power, good In-band-flatness and small offset between upper and lower side band
* The standard product has the VCO signal source inside
( No VCO version is available and customer needs to tell us the
input signal strength such as 0-10dBm )
* The customized options including the software control interface, the exact output power, the output power adjustment option and the input/output connector type, etc.
Product Specifications
Item No. |
Item Name |
Data |
Unit |
Note |
1 |
Frequency Range |
90- 110 |
MHZ |
|
2 |
Working Temperature |
-10~+75 |
℃ |
|
3 |
Max Output Power |
50 |
W |
|
4 |
Working Voltage |
DC24 |
V |
|
5 |
Max Gain |
47 |
dB |
|
6 |
Flatness |
±1 |
dB |
|
7 |
Max Current |
5 |
A |
|
8 |
Input/Output VSWR |
≤1.5 |
|
|
9 |
Input Connector |
D-SUB |
|
|
10 |
Output Connector |
N/F |
|
50Ω |
11 |
Work Efficiency |
41.6 |
|
When Max Output |
12 |
Switch Control |
High Low Level Current Output |
V |
0V OFF/0.6 ON |
13 |
Size |
202 * 102 * 27 |
mm |
Including the Connector Length |
14 |
Weight |
910 |
g |
Approximate Value |
15 |
Out Shell Material |
Aluminum |
|
|
Product Size and Weight
Precautions
Please ensure the RF jammer module is equipped with the necessary heat dissipation accessory, the well-connected antenna and the suitable power supply before its use.
-- For heat dissipation accessory
* Cause the output power is on the high side, the module will have the rising temperature
* Please ensure the module is equipped with the suitable heat sink and cooling fans to keep the module at a low temperature and in a high efficient status
* If without the relative heat dissipation accessory, the module will have the short wire or be directly damaged
-- For antenna connection
Please ensure the antenna is well connected before the power is on or the jammer module will be damaged
-- For power supply
When the voltage option is 24 to 28V, the jammer module will have the optimization jamming effect